Connect to your MX-5 Blind Spot Monitoring System to change settings.
⚠️ Unsupported Browser
Apple does not allow connection to BLE devices from stock web browsers. Please download Bluefy from the App Store to access this page.
Connected
Button Panel
StatusNot bonded
Panel Address--
Press "Find Panel" then hold any button on the wireless panel within 30 seconds.
OUT1 / OUT2 Mode
Paired ModeSaved
EDFC Control
Current State
0
Up ButtonSaved
Down ButtonSaved
Boot StateSaved
OUT1
ModeSaved
ButtonSaved
Boot BehaviorSaved
Resting StateSaved
State
OUT2
ModeSaved
ButtonSaved
Boot BehaviorSaved
Resting StateSaved
State
OUT3
ModeSaved
ButtonSaved
Boot BehaviorSaved
Resting StateSaved
State
OUT4
ModeSaved
ButtonSaved
Boot BehaviorSaved
Resting StateSaved
State
AUX Power
ModeSaved
ButtonSaved
Boot BehaviorSaved
Resting StateSaved
State
Bluetooth Accessories
Status--
Target Device--
Speed
--
mph
RPM--
Throttle--%
Gear / Clutch
-
--
Status
Left Blinker
Right Blinker
Reverse
Headlights--
Brake Pressure--
Steering--°
Temperatures
Coolant--
Intake Air--
Fuel Level--%
Wheels
Sensor 1
--
--
--
Sensor 2
--
--
--
Sensor 3
--
--
--
Sensor 4
--
--
--
Duplicate assignments detected
Fuel / O2 (Polled)
Fuel (Liters)-- L
Fuel Temp--
O2 Concentration--%
Roof Status
--
Camera / Blinker Settings
Enable Turn Signal CamerasSaved
Default CameraSaved
Camera for Turn SignalSaved
Signal Cams in ReverseSaved
Speed Threshold (mph)Saved
Hold SecondsSaved
Minimum Camera On Time (sec)Saved
Blinker Dismiss Buttons▼
Mute Button
Home Button
DSC Button
Back Button
Press any selected button to dismiss or restore the blinker camera mid-session.
Front Camera
Enable Front CameraSaved
Speed Cutoff (mph)Saved
Signal Cams While Front CameraSaved
Activation Triggers▼
Auto (speed only)
Mute Button
Home Button
DSC Button
Back Button
Auto turns the camera on whenever you're at or below the speed cutoff. Button triggers let you toggle it on/off. Stays on through reverse for parallel parking.
Misc
Enable Touch While DrivingSaved
Compass will not work in the car while this feature is enabled.
Lane Departure AlertSaved
Lane Check (Knob Tilt)Saved
Tilt the commander knob to view cameras: left/right for sides, forward for front (if enabled), back for rear. Tilt another direction to switch. Press the knob in to exit.
Camera Power Options▼
Side cameras are always-on by default. Turning this off may prolong camera life but can cause a brief blue tint when blinker cameras first activate as they power up.
